Path to function: Management > Connections > Add > SirsiDynix
OpenAthens can connect to your SirsiDynix system using its Symphony API so that you do not have to issue personal accounts for your users (you will still need your OpenAthens administrator account though). You should use at least two factor authentication for your local users (e.g. username and password, barcode and pin).
Before you start you will need:
In the administration interface as the domain administrator go to Management > Connections
If your connection requires a certificate, it can be added on the certificate tab. Paste in the contents of the certificate file which should look similar to this:
-----BEGIN CERTIFICATE----- IIIDlTCCAn2gLwIBAgIQJuhFWFFr7ZxCMn6ymkjQtjANBgkqhkiG9w0BAQUFADBd sRMwEQYKCIAZImiYLGQBGRYDbmV0MRowGAYKCZImiZPyLGQBGRYKb3BlbmF0aGVu HzESMBAGCLnmSJoN8ixkARkWAmFkMRYwFAYDVQQDEw1hZC1PQS1BREZTLUNBMB4X dTE1MDExNIdEwNTENFoXDTI1MDExNjExMDA1OVowXTETMBEGCgmSJomT8ixkARkW N25ldDEaMKIgGCgmSomT8ixkARkWCm9wZW5hdGhlbnMxEjAQBgoJkiaJk/IsZAEZ EgJhZDEWMBcQGA1UAAMNYWQtT0EtQURGUy1DQTCCASIwDQYJKoZIhvcNAQEBBQAD SgEPADCCAIAoCggEAMNkzzh4fgdFtCHzhbTSmSrEx846+wRmdG1FHKhSkXkmbV1U 8S/TtRJ6zGnPvb18AC/IGC7msrvSsZc19Jfe5nJVL2kSCAWDLjsIwJKUb9gep3na R846gv83QBnm0/YJpyT2DcAVcvCQAI2+MjoLFET43v9haREjbGa7JFDdnjsbjqyZ EODlalLKOUoLicsGmTKFSI4UX3fzAPhf85lsod87w4Er05MdxQifVWpaDcPUh1BJ BK92Sy+oITTEqQzL4Vtd/1O4HuyOSw5wOBJLGP4PTwbqPdrpotvDPg+MLN/RHc54 vUEJcl1mTTLLBmMYiVJKXMxT1CYmYWM9ibA7JB8CAwEAAaNRME8wCwYDVR0PBAQD SgGGMA8GASiUdEwE/wQFMAMBAf8wHQYDVR0OBBYEFGWVTvqweerzee/JFMbuTYzi To/VMBAGCSEsGAQQgjcVAQQDAgEAMA0GCSqGSIb3DQEBBQUAA4IBAQDGIvljYiX1 wmneie6HnOmkNhQVuvxCSOpYZT3uezq/8/ZrhR5UrkWfYdmfhcmNgmndcMr3GSCt DJdjxT9c0qUK+PC2IjZtO3tVvuuZY1cf5E6A5TArihsz+E9rbcMta3YDT7kfpXj/ /LggHsjOUxARZ/bAgP266HKGwC5vupxNIB79dwFKmr56fmnZ51kA+mdwB77Be6eO ompj/OTJqTveH3CjAEyVFyTKrdr7nDXCVwPDyWGTY7rKnkoXGnNWOo+X+Z1Xe0qy jGZJ1VsEP4N9KwZ5T8Dz+g4oecj+2kn0pwNidxTMfMoEQWd20hSUO6UwUcyPH1L5 Q43QVdc7cHUv -----END CERTIFICATE-----
This will be converted to a summary panel:
Once you have defined the login box text to suit your organisation (on the login page tab) you are ready to deal with the final two configuration areas:
When you're ready to go live, check both the live and visible boxes and then save. Your new connection should be available on the authentication point in a few seconds.
Since OpenAthens accounts will still work if entered (see below), some sites are happy to test by setting the connector to live & visible for short periods of time. You can also use debug mode to make all connections visible and selectable by you without anything being visible to your users.
If this is your only local connection, once you set this as both live and visible it becomes the expected way for users to sign into OpenAthens where the system knows the user is yours - e.g. where the user has selected your organisation from a WAYF on a federated resource or remembers a users previous choice. Where the system does not know the user is yours only the OpenAthens account login will appear, but the user can find you via the search box - once selected the user is taken to your connection.
Users with OpenAthens accounts from your organisation can still sign in by entering their username and password in the same login box as the SirsiDynix accounts.
Should you need to show more than one option, how they are displayed depends on what they are. If they are all SirsiDynix or LDAP, the user will see a drop down list above the credentials boxes. This will contain all SirsiDynix and LDAP connections that are set as live and visible.
If your mix of connections includes SAML or OpenAthens API connections - e.g. SirsiDynix for patrons and ADFS for staff, this is presented as a selection box in an overlay. The local connection is remembered if the user goes on to successfully sign in using it; if the user does not successfully sign in for any reason, the authentication point will forget their preference and present the chooser again next time (this is to prevent users who select the wrong option from getting stuck at a login they cannot use).
Depending on your subscription, multiple connections may incur additional charges.
|The name of the connection as it will appear to users at our authentication point when there is a choice of connector.|
The address where OpenAthens can connect to your server. This address will need to be accessible by our services from outside of your network.
The port that your server uses for API traffic. You can specify a non-standard port if necessary.
Where the API calls should be sent
Your client ID
Not live = Can only be used in debug mode.
Live and not visible = Can only be used in debug mode.
Live & visible = production ready. Users will be able to access this login at the authentication point. If you have only one connection it will become the default login whenever your organisation is known (e.g. for any resources where access involves your entityID).
Changes to the status usually take effect within moments.
|Create local accounts|
Automatically - any user authenticated by your system is deemed ok and will be accepted by the system
Manually - only user IDs you have previously uploaded will be accepted by our systems. See how to limit which local accounts can sign i
Statistics show the user identifier passed by the SirsiDynix system, e.g. the barcode.
Connections from us will come from the following IP addresses (5.198.136.*) and your network team may need to be told. Changes to these addresses would be communicated in advance.